1969 4020 clutch

JamesJTX · Apr 23, 2019

Posted in JD forum also, went to move tractor felt like a bump
when pushed clutch in about 2 inches from bottom and will not
go into gear, will go to park but that's all, need help on fix if
possible. Thanks

Tx Jim · Apr 23, 2019

Remove inspection cover on the bottom of clutch housing with aid of flashlight look inside to determine the problem. It's possible a PP finger bolt broke.

JamesJTX · Apr 23, 2019

Sorry to sound dumb but where exactly is that only plate I've
found is 2 by 4 plate in front of brake pedals.

tim s · Apr 23, 2019

It's down under the clutch housing,, 2 3/8" bolts hold it in place.

JamesJTX · Apr 23, 2019

Yep I finally laid down and found it and fixing to pull it off thanks guys.

Northvale PA · Apr 23, 2019

Look up inside with a flashlight. Pull the clutch pedal forward with your hand. The throw out bearing should move forward, contacting the clutch fingers which in turn releases the clutch plate. The bearing needs to be greased periodically. If it seizes up, the fingers get burned off quick. The PTO clutch bearing has a grease zerk too. Grease both of them.

Mike M · Apr 24, 2019

A bolt holding the clutch pack together could of broken too ?

1969 4020 clutch

JamesJTX

Member

Tx Jim

Well-known Member

JamesJTX

Member

tim s

Well-known Member

JamesJTX

Member

Northvale PA

Member

Mike M

Well-known Member

Similar threads