1026 with ventilation!

Tractorcedric · Apr 17, 2019

So the neighbor has a 1026 HYDRO that has #5 rod sticking out the side. Was there any IH combines that used that engine for a donor? Just another winter project maybe!

VicS · Apr 17, 2019

Any of the rotary combines would work. But a old state truck 466 are cheaper. And would have a german Bosch pump. Think yours is 409 cu in. Bigger is better.

CDN 400 · Apr 17, 2019

None of the rotary engines will work only an early 915 will work but that will be like trying yo find hen's teeth. The engine in the tractor is a 407 and you will pay dearly for a good used one.

Donald in MN · Apr 17, 2019

the 856 1256 and 1456 used the D407 engine.

Roger in Iowa · Apr 17, 2019

School bus engine?

ejr-IA. · Apr 17, 2019

I think by using 1066 frame rails along with 1066 hydro parts and engine that would be away to do it.I have seen a few dt 407 on this sight.Early 815 and 915 had 361 and 407.

hoghollow · Apr 17, 2019

Madison Wi craigslist has one for sale. post id # 6858038952 Don't know where you are located. This one is in sw wisconsin. 500 hr on overhaul

tomstractorsandtoys · Apr 17, 2019

Years ago I bough a real nice 706 diesel that seemed low houred and all original. Dad sent the hired man to spread fertlizer and he came back a few minutes later with the thing making an awful racket. It had put a rod thru the side of the block and the hired man being a little lazy decided to drive it back rather than shut it down. He said it was already junk so running it a little longer was not going to hurt. I guess he was right. Tom

1026 with ventilation!

Tractorcedric

Member

VicS

Well-known Member

CDN 400

Member

Donald in MN

Member

Roger in Iowa

Well-known Member

ejr-IA.

Member

hoghollow

Member

tomstractorsandtoys

Well-known Member

Similar threads