Hello maybe a shot in the dark: I am putting a crown and pinion in a 3010 and at the point of putting the transmission back together with a newer countershaft, reverse pinion gear, and 1st and 3rd gear on the pinion shaft. My problem is when I go though the shifting sequenses I have no reverse at all. I was very careful to get everything back as per the book,obviously I goofed. I would like to have some idea what to target before I start ripping it apart again. As far as the gears, they all seam to mesh and the shifting seams proper. If anyone has any thoughts I would greatly appreciate some advice.
Thankyou
Thankyou
