Hi, I'm new to the forum and was hoping I could get some guidance on a PTO problem.
I have a 1992 JD 2155. Last year I was using my brush hog to mow and hog out 1" brush. It worked good over several hours of work. In the fall I started to have problems as the brush hog would slow down and not cut grass after about 20 feet after starting to cut.
I'm wondering what you all might suggest is my first step. I did buy the TM-4435 manual, but it really doesn't have a trouble shooting process. I do see the information on the PTO control valve assembly, but not sure I should dive deeper into that without some definitive testing.
Any suggestions?
Much appreciated, Joe
I have a 1992 JD 2155. Last year I was using my brush hog to mow and hog out 1" brush. It worked good over several hours of work. In the fall I started to have problems as the brush hog would slow down and not cut grass after about 20 feet after starting to cut.
I'm wondering what you all might suggest is my first step. I did buy the TM-4435 manual, but it really doesn't have a trouble shooting process. I do see the information on the PTO control valve assembly, but not sure I should dive deeper into that without some definitive testing.
Any suggestions?
Much appreciated, Joe
Once I do I will respond and share my findings.