update on 3910 ford clutch.

Had to add shims to pressure plate to flywheell. Measured everthing and added one sixteenth shim under all four mounting plates. Throw out bearing yoke had 5/16 travel from being worn. Welded up the slot the bolt went thru and machined it back to fit tight. Works great. Had to lengthen clutch rod 1 and 1/4 inches. All is well. Thanks everyone for you help
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top