(800) 853-2651
SHOP NOW

GB-900 loader...seals

B

banjoman09

Well-known Member
I know this loader has been out of business for years- but I have one. My bucket keeps rolling-back after I roll it to me...seeping down?.so im going to "reseal" my bucket cylinders. Anyone know where I might find specs on the seals in these two bucket cylinders? Their listed on Ebay but the guy doesn't guarantee they are right. I can tear them apart but would rather have them first "before" I tear them down. Thanks for your thoughts.
 
I have a great bend that I need to reseal rams, after looking into it I'm going to just take them to a hydraulic shop and be done with it , beats getting wrong seals and going through all the return trouble if you can at all
 
pull them out and take with you to a seal and brg. shop. no other way about it when you don't have actual spec's. and aren't sure . they will measure and hand you whats needed. I did the same thing and about $200.00 later I had seals in hand.
 
i'd also make sure it's the cylinder seals and not the control valve, i have a cylinder on my kubota that i thought had a leak, turns out to be in the remote.
 
Yes, Baum Hydraulics, kit F80235, Sequence number G03660. At least you can do some preliminary checking - bore 2.5", rod 1.5", rod wiper metal clad, piston seal o-ring with 3 backup, rod seal o-ring with one backup. Plus you can call them and talk with someone who knows seals if needed.
Baum G03670
 
Taking it to a shop is the best idea, taking the cylinder apart might be harder than you think, plus they have the tools to do it right. Ask if they can pressure test the cylinder to make sure it doesn't leak. Most shops have this ability
 
Ok all of you- and thanks....these rams have a large nut of the end so I see no problem in taking them apart....maybe I can do this in my shop. I will contact the address you provided me and thanks again!
 
You must log in or register to reply here.

Similar threads

U
MF 200 Loader Dump Cylinder
Replies
3
Views
300
Used-to-be-iowa-dave
U
A
Yanmar 226 Hydraulic issues with loader
Replies
2
Views
284
winston-HT
W
M
Old single acting loader, goes up, but won't come down
2
Replies
34
Views
2K
mywizbo
M
MNSawmill
Need help finding Sherman Forklift cylinder seals on Ford 801
Replies
3
Views
251
Tim PloughNman Daley RIP
T
K
Ford 800/900 Hydraulic Remote - Auxiliary Port
Replies
8
Views
628
KJMClark
K
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top