Kubota B2150 3 Point lift surges

deerlyparted · Nov 28, 2018

Any ideas as to why my 3 point hitch surges or hunts for its correct position when it has any load at all on the hitch? Something with control rod or maybe something broken in valve feeding the hydraulics for the hitch? Anyone have repair instructions from service manual? . It is the manual transmission mode not the hydrostat tractor if that makes a difference. Thanks in advance for any help.

jm. · Nov 28, 2018

I can talk you thru solving the problem but just too much to type here and also some points are important, need to make sure you understand . Click on the jm. and send me an e mail with a phone number and good time to call or send me a e mail and I will send you my phone number. jm.

sixbales · Nov 29, 2018

When you say your lift "surges or hunts" for position, does your lift drift down and correct back up on a frequent basis (Hiccups)? If this is your case, to me this would indicate internal leakage in your lift system.

Ken Macfarlane · Nov 29, 2018

As noted usually lift cylinder leakage, easy to spot as the heavier the implement the faster the drop part of the cycle. Can't recall if the B2150 had optional draft control but if its not properly in position control or the sensing link isn't hooked up right it can make random lifting and dropping.

Kubota B2150 3 Point lift surges

deerlyparted

Member

jm.

Well-known Member

sixbales

Member

Ken Macfarlane

Well-known Member

Similar threads