Massey 1155 power adjust rims

SVcummins · Nov 25, 2018

Measured the rims they?re 18 inches wide flange to flange . So that actually makes them 16 wide . The one has a little surface rust but not bad the other looks like new . They came off a 1155 Massey . Who wants them before I take the gas axe to them ?

Dieseltech · Nov 25, 2018

Those ARE 18 inches wide, rims are measured just inside the flanges where the tire bead seats. Those rims are for 20.8 X 38 tires, and will also fit AC, Ford, Oliver, White, and other eight ramp tractors. I would not cut them up. Wish you were close to Indiana, I have 16 X 38 nine bolt dual rims I'd trade for those..

SVcummins · Nov 25, 2018

I wish I was closer to . There?s a couple guys near Idaho that were wanting them hopefully they?ll see this post and see if they want them still

DeltaRed · Nov 25, 2018

Don't cut em.Find some other rims. Nyssa Salvage is close to you,they will have the rims you need. I have a pair of rims that would work. Came off my 1256.

JD Seller · Nov 25, 2018

I will second them being 18 inches wide and for 20.8x38 tires.

Around here nine bolt dual sets will not bring much of anything. I sold a set of good 18.4x38 , nine bolt duals that would fit a JD 4020. Tires 40%, with ubolt hubs. I got $450 out of everything.

Nine bolt 38" dual rims will not bring $50 each here.

SVcummins · Nov 25, 2018

It?s not worth it to me to drive that far when I?ve already got these . 9 bolt rims only are a 1000$ a set with no rubber

SVcummins · Nov 25, 2018

That?s funny because they are a thousand dollars a set here for 9 bolt 38 and Inch rims no rubber

SVcummins · Nov 25, 2018

18.4.38 Firestone?s came off of them

Dale39 · Nov 26, 2018

(quoted from post at 20:57:51 11/25/18) Measured the rims they?re 18 inches wide flange to flange . So that actually makes them 16 wide . The one has a little surface rust but not bad the other looks like new . They came off a 1155 Massey . Who wants them before I take the gas axe to them ?
<img src="https://www.yesterdaystractors.com/cvphotos/cvphoto3766.jpg">

<img src="https://www.yesterdaystractors.com/cvphotos/cvphoto3767.jpg">

<img src="https://www.yesterdaystractors.com/cvphotos/cvphoto3768.jpg">

<img src="https://www.yesterdaystractors.com/cvphotos/cvphoto3769.jpg">

Where are you located???

SVcummins · Nov 26, 2018

Se Idaho

Dale39 · Nov 26, 2018

(quoted from post at 13:49:51 11/26/18) Se Idaho

Sad you so far away...I'm in Ontario

Steven-Id · Nov 28, 2018

SV do you need rims that wide? will they match up with what is on the tractor? I would definately be interested if they weren't that wide. I responded on your other post that I have a set of dual rims that have the standoff and they use clamps to attach them. they are probably 12-13" wide. Would that make a better match on your tractor? I think I have enough clamps and eyes for them also.

Steven

SVcummins · Nov 29, 2018

Steven if your rims were 14 or. 15 wide they would work . I would also sell them if you wanted to buy them out right

SVcummins · Nov 29, 2018

Steven shoot me an email If you?re interested
[email protected]

Massey 1155 power adjust rims

SVcummins

Well-known Member

Dieseltech

Well-known Member

SVcummins

Well-known Member

DeltaRed

Well-known Member

JD Seller

Well-known Member

SVcummins

Well-known Member

SVcummins

Well-known Member

SVcummins

Well-known Member

Dale39

Member

SVcummins

Well-known Member

Dale39

Member

Steven-Id

Member

SVcummins

Well-known Member

SVcummins

Well-known Member

Similar threads