Rusty Nuts And Bolts

rusty6

Well-known Member
Not tractor related but this is on old cars. Decided to try a switch of rear bumpers as the one on the 53 Merc parts car looks better than the one on the "driver" 52 Merc. Some of the bolts came out ok but I've hit one that got so stubborn I had to use a "zip disk" to cut it off. 65 years of rust and corrosion. Can't get an air impact on it either. They are a bit overkill , 5/8 inch , fine thread bolts. Some of it in the video here.

cvphoto2033.jpg

Mercury Bumpers
 
(quoted from post at 20:39:06 11/08/18) Waayyyy cool photo through the door!!
Thanks, just a lucky shot as I have the Gopro camera set on 1080P and it distorts the edges of the photos. So it made the doorway of the shed looked curved and gave a unique effect. Plus I jazzed it up a little with some adobe editing on the lighting.
 
We?ve had some really cold weather and a bit of
snow here lately to . Do you have your fall tillage
done ?
 
(quoted from post at 21:12:22 11/08/18) We?ve had some really cold weather and a bit of
snow here lately to . Do you have your fall tillage
done ?
Anything important is done. Field work is just a memory now. Ground frozen . Should be able to skate on the sloughs by tomorrow as its headed down below zero tonight.
 
Wow that makes for a long long Winter,I'm figuring I might have to start a fire in the wood stove in the morning maybe down to 71 degrees in the house.It only got below 0 last Winter
here 2 or 3 nights.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top