John Deere 4430 cab roof

Kory1998 · Nov 3, 2018

Need to find out how to take off cab roof on a 4430 roof cracked and fell apart while shredding brush. I see two big bolts but idk if their is any rivets that need to come out . Want to see what all I need to redo this the right way.

Bob · Nov 3, 2018

Yep, two big bolts, and 3 or 4 Phillips head screws with the heads facing down across the front, then you can lift the plastic top up.

If replacing it, will have to drill out a couple of pop rivets at the back on the LH and RH side to free the "lid" from it's hinges.

Tx Jim · Nov 4, 2018

Ditto what Bob stated remove a 5/8'' bolt on each side about 3/4 back & 3 phillips screws under front ledge then drill out rivets or unbolt rear hinges.

centash · Nov 4, 2018

Those back hinges may be seized so be prepared for some fun....
Ben

John Deere 4430 cab roof

Kory1998

Member

Bob

Well-known Member

Tx Jim

Well-known Member

centash

Well-known Member

Similar threads