I heeded the advice on not blasting the engine, so scuffed it up today and got down to good metal or solid paint.
The housing behind the engine had a roughness in it, so I pulled that apart, both bearings were rough, so will get those and new seals this week. I would like to get those painted and the engine set back in before winter, so I only have to do sheet metal in the spring.
I have replaced almost every bearing in that tractor, all were pitted.
The housing behind the engine had a roughness in it, so I pulled that apart, both bearings were rough, so will get those and new seals this week. I would like to get those painted and the engine set back in before winter, so I only have to do sheet metal in the spring.
I have replaced almost every bearing in that tractor, all were pitted.