(800) 853-2651
SHOP NOW

Got seed feed shaft free

S

SVcummins

Well-known Member
On one half of the drill freed up still working on the other half of the drill used 3 cans of liquid wrench so far
a281938.jpg
 
just a suggestion, I do not know if you have heard of it or used it,, its called DEEP CREEP by sea foam, That is all I use anymore, little on the pricey side but well worth it
 
Diesel fuel in a garden sprayer is a LOT cheaper!

When done seeding, mix some motor oil and diesel fuel and spray the fluted feeds to help prevent sticking again.
 
The fuel oil and used engine oil works well and much cheaper. We use old oil for oiling chains slides and all sorts of things. We even used to paint it on the sills timbers in the old cow barn when we had cattle in there to keep them from rotting with the manure and urine also water.
 
Your probably right but the side that came loose still
took a 4 foot cheater pipe on the end of my 8 inch
crescent wrench 🔧
 
The manual says to use diesel and oil mixed to free up the shafts . Still haven?t gotten the other side to come loose yet but I soaked it good and maybe it come loose in a day or two
 
I think I?m gonna oil all 4 drills when I?m done this year . This one wouldn?t Have froze up if it hadn?t had seed left in for 7 years with the lids open
 
(quoted from post at 19:56:05 10/08/18) I think I?m gonna oil all 4 drills when I?m done this year . This one wouldn?t Have froze up if it hadn?t had seed left in for 7 years with the lids open
Click to expand...

The agitator in old drop type fertilizer spreaders were a similar arrangement. The farmer that I worked for as a kid used drain oil very liberally on his after he got done with it each year.
 
You must log in or register to reply here.

Similar threads

W
Food Plot Drill
Replies
2
Views
365
BarnyardEngineering
BarnyardEngineering
rusty6
Using New Technology
Replies
3
Views
367
rusty6
rusty6
S
Cleaning outside of IH I20 brass carb
Replies
9
Views
502
rustred
rustred
F
DIY PTO Shaft Help
Replies
8
Views
293
wore out
wore out
tractorguy2
B&S carburetor
Replies
7
Views
364
tractorguy2
tractorguy2
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top