Farmall Super H w/ Power Steering Problem

WarrenIH · Sep 28, 2018

I have a Charlyn power steering on my Super H and it is push oil back out through the breather hole in the reservoir. I changed the oil and put a new filter in, but still know change. What should I be looking into next? Everything was working fine earlier this summer.

Steve@Advance · Sep 28, 2018

Does the oil come out when you shut the engine off?

If so, it has air whipped into the oil. It will eventually work it's way out when it is sitting with the pump not running. Keep an eye on the level, it will drop as the air comes out. Low oil will get more air in the system.

onefarmer · Sep 28, 2018

Mine was doing that. Finally the torque generator died and I put on a new one. No more foaming. Not saying yous is the same but cured mine.

WarrenIH · Sep 29, 2018

(quoted from post at 19:18:19 09/28/18) Mine was doing that. Finally the torque generator died and I put on a new one. No more foaming. Not saying yous is the same but cured mine.

Not sure what you mean on replacing the torque generator, is that still part of the Charlyn pump or motor? Please explain more, I am not sure I understand.

Farmall Super H w/ Power Steering Problem

WarrenIH

New User

Steve@Advance

Well-known Member

onefarmer

Well-known Member

WarrenIH

New User

Similar threads