Chinookfarmer
New User
Hi. On my 1586 I have hooked to a single acting hydraulic cylinder (a grain auger) at idle it will lift the auger. As I throttle up the tractor the auger speeds up for a moment then stops. If I then idle down the tractor the auger starts to raise again.
I've pulled the relief valve from the MCV and checked it. it looks good. The oil filter was recently changed at the dealer before I purchased the tractor. Any Ideas what could cause this?
I've pulled the relief valve from the MCV and checked it. it looks good. The oil filter was recently changed at the dealer before I purchased the tractor. Any Ideas what could cause this?