8n hydraulics not working

Troyhudd · Aug 25, 2018

I just changed the hydraulic fluid in my 8n tractor and now
It?s not lefting my bushhog. Does anyone know of something
I could have done to make it not work? Thanks for any help.

old · Aug 25, 2018

Time to pull the right hand inspection plate off and watch what is going on in there unless of course you forgot to engage the PTO

Oldiron29 · Aug 25, 2018

When draining your fluid you must prime the pump when install new fluid. Remove hex head plug on top of pump and blow compressed air in hydraulic dip stick hole till fluid comes out than reinstall plug. see if that does it!

old · Aug 25, 2018

On the 8N the hyd pump sits In the oil sump so no priming needed or can even be done. Your think of the 600/800/601/801 series tractor where the pump is engine driven but on the 8N the pump is PTO driven and the pump sits below the seat area of the tractor

sotxbill · Aug 25, 2018

Did you remember to turn on the pto?

8n hydraulics not working

Troyhudd

New User

old

Well-known Member

Oldiron29

Well-known Member

old

Well-known Member

sotxbill

Well-known Member

Similar threads