Need john deere 48 loader part

jdfamily · Aug 3, 2018

Guys, you have given me some great information and I have my 48 loader mounted on the 3010 and works great.
I am missing the arm that the hydraulic controls mount on. It attaches to the left frame of the loader and
places the controls near your right hand. Anyone have an idea where I might find one, if not will probably
try fabricate one from a picture

Bob · Aug 3, 2018

<img src = "http://oi66.tinypic.com/e7biwg.jpg">

This must be what you are looking for (#4) part #AC15632?

I checked the usual obsolete parts places, none available, you will have to find one in a salvage yard, I'm afraid!

jdfamily · Aug 3, 2018

Yea that is it, will keep looking around.
Probably not to hard to make up

John in Md. · Aug 3, 2018

I bet it isn't going to be cheap. Might be better to tie into scv's and use those valves.

Kansas4010 · Aug 3, 2018

I've been looking for a set of mounts for my 48 loader. Looks about as cheap to buy another loader and keep what I need and sell the rest. Might be what you'll end up doing to.

Brendon Warren · Aug 3, 2018

Sorry I haven't had a chance to go have a look yet.

jdfamily · Aug 3, 2018

IF you decide to get another loader, I would be interested in the hydraulic mounts on the loader. Finding parts for these older loaders is a real challenge.
Thanks.

DeltaRed · Aug 3, 2018

Your best bet would be to just make something up.Go look in your 'iron pile'. LOL

formerly ny bill · Aug 3, 2018

I used to have one that came on a pallet of stuff from a JD dealer closeout. haven't seen it in a long while, but don't recall using it for anything. I can check in the morning if I can remember.

VB Farm · Aug 4, 2018

(quoted from post at 14:32:19 08/03/18) I've been looking for a set of mounts for my 48 loader. Looks about as cheap to buy another loader and keep what I need and sell the rest. Might be what you'll end up doing to.

I have the mounts that fit the on the side of a 3010. Don't have the front mount.

jdfamily · Aug 4, 2018

Thanks,

jdfamily · Aug 4, 2018

Thanks I have the mounting brackets, but do not have the bracket that attaches to the
loader itself to attach the hydraulic controls. It puts the controls right where you
need them.

jdfamily · Aug 4, 2018

Hope you remember today!!!!

Kansas4010 · Aug 4, 2018

Would you have any interest in selling them
and if you did how much would you want for
them? I'm in NE Kansas.

VB Farm · Aug 4, 2018

(quoted from post at 13:17:15 08/04/18) Would you have any interest in selling them
and if you did how much would you want for
them? I'm in NE Kansas.

I have no need for them would sell. Make offer. I 'm 10 miles north of Sabetha.

formerly ny bill · Aug 4, 2018

got it! NOS, but really weathered, paintwise. no accessory pieces with it, just the piece #4 in the diagram.
I'm near Binghamton, NY.

formerly ny bill · Aug 4, 2018

forgot to open email

jdfamily · Aug 4, 2018

Thanks, any chance you can send me a picture of the bracket?
Just want to make sure we are talking the same piece. If it
is the right bracket for the 48 loader, how about $40?

Kansas4010 · Aug 4, 2018

I'm 30 miles south of Topeka so I would be very interested in them. I've tried looking for a starting price online but can't find anyone selling them. If you're think it's fair would you consider $150 for the pair. Anyway you could post a picture of them or send me one?

Need john deere 48 loader part

jdfamily

Member

Bob

Well-known Member

jdfamily

Member

John in Md.

Member

Kansas4010

Well-known Member

Brendon Warren

Well-known Member

jdfamily

Member

DeltaRed

Well-known Member

formerly ny bill

Well-known Member

VB Farm

New User

jdfamily

Member

jdfamily

Member

jdfamily

Member

Kansas4010

Well-known Member

VB Farm

New User

formerly ny bill

Well-known Member

formerly ny bill

Well-known Member

jdfamily

Member

Kansas4010

Well-known Member

Similar threads