chamlers wd flywheel mounting to crackshaft

chevy1946 · Jul 3, 2018

1950 allis chamler wd flywheel bolting to the crank, is there only one pattern it ill bolt up? Bolted flywheel to the crank no reading first about the F marking one the flywheel and mounted into the tractor already, attempting to set the mag and distributor to correct timing and it diesel at shut down. any help would be great

cuby · Jul 3, 2018

Time it according to fire order and check where F mark & mag. is at.

chevy1946 · Jul 3, 2018

wish I would of cleaned the surface where the F mark was on the flywheel I used a wire brush cleaning the surface area where it should be only finding factory marks, maybe more wire brushing as it is running, removed the inspection plate completely to access the flywheel. Brought #1 to top and installed mag it fired right up. Bought the engine back in MI and live in AZ

JMS/.MN · Jul 4, 2018

Yes- only one pattern fits. If all the holes have bolts in, it"s rotated correctly.

chamlers wd flywheel mounting to crackshaft

chevy1946

New User

cuby

Member

chevy1946

New User

JMS/.MN

Well-known Member

Similar threads