Part number ABC 066 is for a 9n before serial number 12500. My Serial number 9n9881. It is for a dash with a 7/8" hole. That is what I have. The switch has a 7/8" stem and the push button is 1 inch. That isn't going to work. The body of the switch is too large to mount properly without making contact with the Ammeter. So I made two spacers to hold the starter switch away from the inside of the dash. To use this switch I will need to drill the 7/8" hole to 1 inch. I do not like the hassle of returning parts. Also, they believe that they have given me the proper part and I would need to buy a part that isn't for this tractor, in order to make it work. Would you drill it out or should I try to find a starter button with the 3/4" stem and 7/8"button?
TY
SDE
TY
SDE