IH 350. hydraulic troubles, need help.

SodBuster87 · May 18, 2018

I was grading the drive way with the 3pt on my 350 was going good til I went to drop the blade and nothing. Its dead won't raise or lower. Didn't make any noises anything just dead. A played with the lever and got it working then it quit again. Hyd fluid is a little low but nothing that I thought would make a difference. Lift for 3 pt is one way. Even with low fluid it should still drop? Only thought I have is maybe air in the system? I tryed that little one way/two way valve in both directions and no change. Otherwise Im out of ideas. HELP!

Sod Buster.

SodBuster87 · May 18, 2018

I should add that if you play with the lever long enough it will raise a couple inches then stop til you play with the lever some more.

MARK ROBKE · May 19, 2018

Is the control lever slipping on its shaft ? Mark.

Janicholson · May 19, 2018

probable. If it has front valves, they could be a source of an un worn lever. Jim

Andy Martin · May 19, 2018

Sounds like an air lock to me.

IH 350. hydraulic troubles, need help.

SodBuster87

Member

SodBuster87

Member

MARK ROBKE

Well-known Member

Janicholson

Well-known Member

Andy Martin

Well-known Member

Similar threads