Oliver 77 rotor part number

Nick167

Member
Can anyone give me the part number for a Oliver 77 rotor I got what I thought was the right one and looked right but wouldn?t fit on the distributor shaft
 
All clip on cap Delco distributors take the same rotor, so you got an improperly made one or the parts person handed you the wrong one.
 
I just looked at the parts book. It is possible Oliver changed their part number when Delco changed theirs. The "H" and "K" indicate being introduced on different product lines. Been behind a parts counter from '84 till my stroke last September, only two rotors for Delco (non HEI) one for clip held caps, one for screw on caps. Is there a Delco tag on the distributor, or are you simply going by parts catalogs? Some prior owner could have inserted another brand distributor. Also some after market parts are not the best quality control. At a former employer we received a batch from an overseas manufacturer that had supplied good parts both before, and since, but got a bad batch of several hundred. Shaft hole was slightly too small, ran a pocket knife around the inside once and they would fit right on.
 
Thanks guys I really appreciate you looking that up I?ll save the numbers and see if I can find a tag on the distributor I ended up finding a spare on a another non running tractor and cleaned the shaft with some sandpaper as it was a little rusty and it seemed to go on so I think now that was part of my problem thanks again!
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top