Stover hit and miss

Olliejunkie · Feb 26, 2018

Sorry it's not a tractor but I may make it into a tractor. I would've put it on the stationary engine forum but I figured I would receive faster replies here. Any idea on the value of this engine? I have not physically seen it so I can't tell you much.

Dave H (MI) · Feb 26, 2018

I found one of those at a business liquidation a few year ago. Guy wanted a small fortune for it and it was not in much better shape than that one. I looked it up at the time. Cannot tell you exactly but it was not worth a lot.

John Achmann · Feb 26, 2018

Guessing it don?t run by the looks of the external piston. Parts
engine should be worth $200 max from what I?ve seen. Saw a
running one sell for $425 not that long ago. That engine
wasn?t restored.

DCM · Feb 26, 2018

Complete running JDs 1 1/2 hp going for 600-700 if your lucky, puts the stover at an entry level value.

MT RON · Feb 26, 2018

300.00 tops that is if it hasn't been frozen and something cracked.

Olliejunkie · Feb 26, 2018

Thank you guys. I am new to hit and miss. I noticed this one has a spark plug. I think I will stir away or make a low offer.

db4600 · Feb 26, 2018

Was somebody driving their hotwheels in the fresh concrete? From the shadowing it's tough to tell if it's a headless. Running $300.00 and go down from there.

DonNOhio · Feb 26, 2018

I gave $450 for a runner. The correct mag that goes with will run $300 or so.

ArleninOr · Feb 26, 2018

Don't think that would have enough Hp to pull that Ollie.

ed will · Feb 26, 2018

Hi, I have one. It's not running but it is all there. It
used to pump water from a well for cattle on my
uncles farm in Saskatoon area. Ed Will Oliver BC

gab · Feb 26, 2018

I got a nephew that rebuilds those things, hauls them to shows, runs a wash machine, corn Sheller, some kind of grinder, a saw you drop over a log and let her run, pumps water and probably more stuff. He must have a dozen motors plus a line shaft, one engine he thinks is one of five in existence. He even has a fall show at his place the last couple of years although I haven't made it yet.

Olliejunkie · Feb 26, 2018

Thanks guys for the comments. I know a little more what I'm looking at. I'm wanting to build something like this to putt around on.

huntingreen2day2 · Feb 27, 2018

Depends if the mag is good or not. Engine without the mag value might be $50, With the mag working maybe $250 to part out. Otherwise I
would not touch it. Cost way more to get it together and running than it would be worth.

ed will · Feb 27, 2018

Hi, I have one. It's not running but it is all there. It
used to pump water from a well for cattle on my
uncles farm in Saskatoon area. Ed Will Oliver BC

Stover hit and miss

Olliejunkie

Well-known Member

Dave H (MI)

Well-known Member

John Achmann

Member

DCM

Well-known Member

MT RON

Member

Olliejunkie

Well-known Member

db4600

Well-known Member

DonNOhio

Member

ArleninOr

Well-known Member

ed will

Well-known Member

gab

Well-known Member

Olliejunkie

Well-known Member

huntingreen2day2

Member

ed will

Well-known Member

Similar threads