fosterdave37
Member
So I bought a MF 20. 3 point would not lift. Brought it home and removed the inspection plates to discover some very ugly fluid. Super milky with a nice white marshmallow fluff looking layer on top. Drained the oil to find about an inch of ice in the bottom of the case. trying to thaw it out but its hard to do in a unheated shed in Northern Michigan. been running a little diesel through trying to get the sludge out. How likely is it that once I get it thawed,cleaned with new oil and filter that it will work or do you think the ice might have screwed the pump?
Any tips tricks advise is appreciated
Any tips tricks advise is appreciated