Powershift in 3545 Massey

RVS

Member
I have a 3545 massey with power shift. The power shift does not wok. There is power at the switch going to the solenoid valve. The valve moves but no high range. Any suggestions.Is there any pressure checks I can do and where would I do them. Thanks
 

Power shift transmissions are shifted by clutch packs. The far most common cause of failure to shift is a seal that is leaking just a little too much for the pack to pressurize and hold. The shop manual may give instructions on how to diagnose it using the onboard micro-processor. Which transmission does it have? The 32 speed was known to be problematic.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top