Unknown belt pulley

Neil Grant · Dec 9, 2017

I got this belt pulley with a Cockshutt 20 I bought. It is not for it at all. Anybody have any idea what it might be for?
<image src="http://forums.yesterdaystractors.com/photos/mvphoto7365.jpg"/>

<image src="http://forums.yesterdaystractors.com/photos/mvphoto7366.jpg"/>

<image src="http://forums.yesterdaystractors.com/photos/mvphoto7367.jpg"/>

el6147 · Dec 9, 2017

with the single secure bolt I guess it is generic for a powered implement,silage blower, sawmill, feed grinder....

Richard G. · Dec 9, 2017

Been trying to figure this one out for years. If I live long enough, I have a plan for it.
Richard in NW SC

onefarmer · Dec 9, 2017

Looks like the one on my burr mill. The same set screw and pin slot.

DeltaRed · Dec 9, 2017

I think it's from a threshing machine,or something similar.

crawlerjohn · Dec 9, 2017

Probably for a buzzsaw or hammermill to change the speed for the 20.

RBoots · Dec 9, 2017

Care to enlighten us Richard?

Ross

Steve@Advance · Dec 9, 2017

Could have been for anything.

Probably cast, outside machined, then left with a starter bore in the hub to be machined to size by the end user.

They were widely used for line shaft factories, all types of power transmission that used flat belts.

Neil Grant · Dec 9, 2017

I am thinking it is off a buzz saw or such. 50 bucks US plus mailing and it is on the way to you! I am near Ottawa ont.

Leroy · Dec 9, 2017

I would also say line shaft. And I have 2 friends that run machine shops with line shaft.

Neil Grant · Dec 13, 2017

I gave it to a fellow who has some threshing mills nearby.

Unknown belt pulley

Neil Grant

Member

el6147

Member

Richard G.

Well-known Member

onefarmer

Well-known Member

DeltaRed

Well-known Member

crawlerjohn

Member

RBoots

Well-known Member

Steve@Advance

Well-known Member

Neil Grant

Member

Leroy

Well-known Member

Neil Grant

Member

Similar threads