(800) 853-2651
SHOP NOW

Char Lynn

H

haroldseymour

New User
This message is a reply to an archived post by James.6600 on April 06, 2011 at 08:38:01.
The original subject was "Re: Char Lynn".

hello;
I have a leaking s101f unit on my wd45. I could use your old broken unit if it does not leak, or I can order a new seal kit but I am not comfortable doing a reseal myself. I could probably use yours and put my good shaft in it. If you would like to get rid of your unit let me know what you have in mind. Like you say, I do not wish to spend much on the old tractor, even if it has been in the family for three generations.

thanks,
Harold SeymourNote--this is reply to old post regarding need for broken shaft for charlynn s101f on wd45
4896 s cr200e
Clayton, In 46118
phone 317 539 4100
 
i am posting a link to antopic on the farmall forum. it gives the sizes for the o rings on the torque generator, also the part number from napa for the filter in the ps pump. if you have a restriction on the return line from the torque generator, it will blow the seals out. before disassembly, scribe a line down the torque genney so all the sections remain clocked in the right position. hold it upright gently in a vice, remove the end plate, replace seals, then install the bolts. then flip it over and do the other side. only remove the end caps!,
poke here
 
Doesn't Eaton still have a kit available for the torque generators, a lot simpler than selecting and buying individual seals.
 
Harold, welcome to YT! It was nice talking to you on the phone, you sound like a very nice fellow. I guess I took a little extra notice to your post since it mirrored almost exactly the same thing I did to get introduced to YT. I also replied to a archived post about a Charlynn torque generator. I will send you the the info on the seal kit I used via email sometime in the next day or so. I will even post it here in the likelyhood that it will help out other folks as well. Rick
 
(quoted from post at 11:27:24 11/21/17) Harold, welcome to YT! It was nice talking to you on the phone, you sound like a very nice fellow. I guess I took a little extra notice to your post since it mirrored almost exactly the same thing I did to get introduced to YT. I also replied to a archived post about a Charlynn torque generator. I will send you the the info on the seal kit I used via email sometime in the next day or so. I will even post it here in the likelyhood that it will help out other folks as well. Rick
Click to expand...
That's info I'd be interested in as well, thanks!
 
You must log in or register to reply here.

Similar threads

S
Farmall C and the Char-Lynn hydraulic pac
Replies
3
Views
394
caterpillar guy
C
K
Installing Char Lynn on WD45 help
Replies
10
Views
2K
orangepower
O
R
Char Lynn power steering
Replies
2
Views
875
PJH
P
T
Oliver 550 Char Lynn Steering
Replies
0
Views
433
TASO
T
G
char-lynn 960 control valve
Replies
6
Views
3K
gs1150e
G
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top