MF 135 Wiring

Russell Dewsnup · Oct 31, 2017

This is on a Massey Ferguson 135 with Perkins diesel. There were no wires on the start switch. One goes to the starter solenoid. The other comes from the safety switch in the transmission. Does anyone know where the wiring comes out of the transmission and goes to the starter switch?

4play · Oct 31, 2017

I'm not sure what exactly you need. Power from the ign/start switch goes to the neutral switch and then to the starter. The ignition switch gets power from the ammeter (if still used) or battery power

4play · Oct 31, 2017

Maybe you need to know where the neutral switch is? It is mounted on top and front of the trans, just in front of the steering gear box,

Russell Dewsnup · Nov 1, 2017

I am wondering where the neutral switch is located. I need to find the wiring coming from the switch so I can connect it to the key switch. I could run the wiring from the starter solenoid both the power and the start wire, but I would rather have it wired the way it was designed. Thanks for all the help. So far I have not been able to find any wiring on top of the transmission housing. Thanks again

MF 135 Wiring

Russell Dewsnup

Member

4play

Well-known Member

4play

Well-known Member

Russell Dewsnup

Member

Similar threads