Donaldson Steering assist?

Lary1r

New User
Is there any demand any more for the Donaldson, I think that's right, for the Donaldson aftermarket power steering assist unit?
I bought one years ago and could not bring myself to cut the steering shaft to install it on my Alis Chalmers WD45.
Lary
 
I've heard of Char-Lynn now part of Eaton, and Behlin, but never a Donaldson power steering. Char-Lynn was
factory installed by Allis-Chalmers on WD-45's.

Donaldson was one of the more dominate OEM's of air cleaners back in the 1950's and later, still in
business, probably the biggest oem supplier of pleated paper filters and housings.
 
(quoted from post at 14:55:05 10/25/17) I've heard of Char-Lynn now part of Eaton, and Behlin, but never a Donaldson power steering. Char-Lynn was
factory installed by Allis-Chalmers on WD-45's.

Donaldson was one of the more dominate OEM's of air cleaners back in the 1950's and later, still in
business, probably the biggest oem supplier of pleated paper filters and housings.

Donaldson manufactured MOST of the oil bath air cleaners used on the classic and antique tractors that most of us like to use and collect. Donaldson also built the glass jar pre-cleaner that the Farmall folks put toy John Deeres into.
 
The factory power steering for allis WD45 was built by Barnes not CharLynn. Looks a bit like a Behlen unit but is much different when you start looking close. CharLynn units look a bit like a pop can.

jt
 
Maybe it is Char-Lyn? I'll ask my son as he knows more about the old tractors than I.
Thanks guys for replying.
 
Just talked to my son and he said it is a Char-Lynn aftermarket system that I have for the WD45. Any demand or just store it?
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top