1955 Ford 600

Dega

New User
I could use some guidence on replacing/removal of the hydraulic presure line,
On a 1955 Ford 600 tractor,... appreciate it
 
... huh ... huh ... dang it ... I have no idea how to navigate this technology. .. heck it took me better than an hour to figure out how to post this guestion, but thank you I do appreciate your guidence to the archives, tryed that and it pulled up 38 thousand matches ...
 
What do you mean by pressure line?
It could mean any of several things.
The hydraulic manifold that goes from the
oump to the transmission?
A htdraulic hose on a remote valve?
Or do you have a loader on that tractor?
 
(quoted from post at 04:58:54 10/07/17) What do you mean by pressure line?
It could mean any of several things.
The hydraulic manifold that goes from the
oump to the transmission?
A htdraulic hose on a remote valve?
Or do you have a loader on that tractor?
Good morning and thanks for responing, let me explain what has happen, I had attemted to picked up a half of a telephone pole with the boom and it popped (inside the transmission), ... now the hydraulics work for about 10 minutes, then the trans fills up with oil and comes out of the shifter
 
So I am experiencing brain fog on how to diagnose how to proceed from here, with any attempt to repair... found this forum and was hoping that I received enough guidence to "jump start" my mind to work again so I could get my tractor to working again ... so I can get back to work !! .... so any ideas would be greatly appreciated. .. Thank you
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top