Any Kubota guys out there?

Determined · Aug 29, 2017

A friend called me up with a problem.
Kubota M 120
Went to the field, rolled 4 bales, went to move and tractor went 5-10 feet and quit moving.
Tried going backwards, same thing.
While all this is happening there is a beeper sounding but no warning lights on dash saying anything.
Any ideas?

Ken Macfarlane · Aug 29, 2017

Have same tractor and have workshop manual - need the
codes flashed out on the lights

Ken Macfarlane · Aug 29, 2017

I guess I'd better read a bit closer lol - beeper is odd

Ken Macfarlane · Aug 29, 2017

The two continuous alarms are trying to use reverser over 7.6
mph or too much slippage in main clutch. I'd check the fluid
level to start, make sure your filters aren't plugged then the
speed sensors and harness to rule out a faultly shaft speed
signal.

Ken Macfarlane · Aug 29, 2017

Oh also make sure the little mechanical main clutch pressure dump valve under the clutch pedal is coming back up. If it sticks the main clutch will slip.

Determined · Aug 29, 2017

Thanks for the information Ken.
I passed it on to him and he was heading out to the field this afternoon to see what he can figure out.
I will let you know what he finds when he gets back to me.

Any Kubota guys out there?

Determined

Well-known Member

Ken Macfarlane

Well-known Member

Ken Macfarlane

Well-known Member

Ken Macfarlane

Well-known Member

Ken Macfarlane

Well-known Member

Determined

Well-known Member

Similar threads