(800) 853-2651
SHOP NOW

To 20 ferguson

J

JamesWalker

New User
My tractor lift won't work I changed the fluid and still nothing. It was fine last week and now nothing. Any help on troubleshooting would be appreciated.
 
I found this response in the archives. Scroll down about half way to jeff-oh's response. He covered it well.

If this doesn't solve your problem, using the search box at the top of the page, or post on the Harry Ferguson board below.
TO20 Lift Problems
 
(quoted from post at 15:52:58 07/15/17) I found this response in the archives. Scroll down about half way to jeff-oh's response. He covered it well.

If this doesn't solve your problem, using the search box at the top of the page, or post on the Harry Ferguson board below.
TO20 Lift Problems
Click to expand...
Thanks do I need to drain the fluid out to remove the cover? I am a novice at working on tractors.
 
You can remove the side covers without draining the oil.

I would start there, remove the covers, start it up and look inside with a flashlight. Look for oil swirling below the surface, that is a sign of a bad relief valve. Oil pouring from above is a sign of bad cylinder seals. No oil movement at all could be a bad pump.

Whatever you do though, don't reach in there with it running!

With the engine off, you can reach below the oil surface, feel for the control linkage to see if it has come loose. If it suddenly stopped working, that is probably the reason. You will need to drain the oil to repair it though.

In the picture in the link, the picture is sideways and the pump has been removed. The pump is mounted to the plate on the bottom of the case.
 
not to be a wise guy but do you have it in gear.guy called me last week said 3 point did not work well not in gear
 
lt has taken time to get my tractor apart and the valve assembled is on connected and goes back and forth. Should I replace the pressure valve while I have everything drained and apart?
 
You must log in or register to reply here.

Similar threads

P
8n funk 6 starter issue
Replies
15
Views
479
potato
P
O
Need help with Ford 801 select o speed
Replies
2
Views
442
Andy Wickiser
A
GChief
Troy Built Horse Question...
2 3
Replies
55
Views
2K
Caryc
C
H
CIH 395/2250 LOADER
Replies
0
Views
113
hoosier43fan
H
M
Massey Ferguson 65
Replies
5
Views
577
da.bees
D
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top