Fill Livewell
New User
Looking at a 1966 930 case , can buy for $1800. But pto spins all the time & lift arms don't work. Think might be hydraulic pump & clutch on pto , any input would be appreciated.
- Thread starter Fill Livewell
- Start date
Bruce from Can.
Well-known Member
- Location
- Woodville, Ontario, Canada
Pto clutch might just need to be adjusted. As for the
three point hitch arms, could be any one of many
things . From the simplest , low on hytran , sump
pick-up clogged, filter plugged, pump or control
valve needing repair/replacing.
Go down to the Case section of this forum and
post your question again there, many good J.I.Case
fellas there, that can walk you through these
repairs.
Do the remote outlets work ?
three point hitch arms, could be any one of many
things . From the simplest , low on hytran , sump
pick-up clogged, filter plugged, pump or control
valve needing repair/replacing.
Go down to the Case section of this forum and
post your question again there, many good J.I.Case
fellas there, that can walk you through these
repairs.
Do the remote outlets work ?
Fill Livewell
New User
hanks , they said they changed all fluids and filters, sounds pretty cheap that's what scares me
Fill Livewell
New User
es they said the remotes worked good.
Bruce from Can.
Well-known Member
- Location
- Woodville, Ontario, Canada
I love to run my 930, a real old powerhouse. For the
money you are being asked to pay for this tractor,
you could do some repairs , and still have a good
tractor for the money. Big thing to consider is , a lot
of things can go wrong with any tractor that is 50 or
more years old. They are a tractor that can still be
used with many modern implements on the farm.
money you are being asked to pay for this tractor,
you could do some repairs , and still have a good
tractor for the money. Big thing to consider is , a lot
of things can go wrong with any tractor that is 50 or
more years old. They are a tractor that can still be
used with many modern implements on the farm.
Fill Livewell
New User
eah it's way more tractor than I need, but around here a little wd45 or 8n will cost that. I posted same stuff on the case forum. Thanks for your help, been nice talking to you.
Fill Livewell
New User
hanks might have more questions if I get the old gal bought.
I bought a 930 really cheap because of the same problems this one has. The PTO required a simple adjustment. The 3 PT. arms functions are controlled by a "lever" that's on the floor it would be behind your right foot when sitting in the seat. Pull the lever forward to the 1st or 2nd hole and see if that doesn't solve the problem
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy