(800) 853-2651
SHOP NOW

Removing the oil pan on an IH 350U tractor

F

FtInn Farmer

Member
I have an IH 350U tractor that I am trying to remove the oil pan from. The problem is the stabilization arms coming off the front axle meet at the backend of the oil pan. There is one oil pan bolt at that location and it can not be removed without removing the mount point for the arms. When I removed the mounting bolts, the arms would not drop down to allow access to the bolt and the removal of the oil pan. There is pressure on the arms. Any ideas on what I need to do to take the pressure off the arms to allow movement and remove the bolt and the oil pan?
 
Lift up the front by putting blocking (not concerte, use wood) and a jack under the front bolster casting, (not axle). it can also
be lifted under the front of the trans (not on the tin cover) either needs to be held up with wood blocking, not just the jack.
(350 owner) Jim
 
Just like a small Case. You need to properly support the front of the tractor and remove the front axle assy. Even if you could get the bolt out, you need clearance to drop the pan down to clear the oil pump sump screen.
Loren
 
You must log in or register to reply here.

Similar threads

D
MF40 AD3.152 Oil Pan Removal
Replies
10
Views
497
danielapowell
D
S
  • Question
oil Drip pan question 1966 IH Cub Lo Boy Tractor
Replies
18
Views
660
scott 1234
S
S
Rear Engine Oil Leak on Gas IH 674 (C-200 Engine)
Replies
17
Views
728
Ozlander
O
M
Oil Pan
Replies
3
Views
314
nashranch
N
T
International Harvester IH 300 Utility - pipe in oil pan
Replies
6
Views
393
thorn197
T
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top