agco parts

Lee Wegner · May 27, 2017

Seal kit for Hessston FC 2 3/4 cylinder 211.00 dollars thought that was pretty high for some O rings. New cylinder 450.00.

Tech 7 · May 27, 2017

I was after 4 seal kits for a Glencoe soil finisher a couple of weeks ago, went to local Agco dealer who looked them up and said they would order them, fine. 3 days go by, called to see if they had come in..........had not ordered them! Further investigation said the one kit was shown in a Kansas City warehouse, the other was no longer available. Don't expect me back to this dealer. Ever.
Went to my standby bearing/seal/O ring supplier (where I should have gone first), a sort of hole in the wall place, but if Lorne cannot find what you need it likely does not exist. He had 80% of what I needed on hand, the rest the next day.
I think you should search the aftermarket world for your needs as well.

Steve@Advance · May 27, 2017

If there is a hydraulic shop near you, chances are they can match up the old seals for a fraction of the cost.

RBoots · May 27, 2017

They are pretty crazy on stuff. Seal kit for Duetz 6275 tractor was around $400, I got the seals from a hyd shop for $70. Just the blower motor itself for that tractor was $1200. I fixed it with $9 of drill motor bearings. Just put a clutch in it last week. Note*** -not my tractor-, THANKFULLY!

DavidNS · May 27, 2017

If they can't make their money on equipment sales they will make it another way, PARTS.
The wrong parts person can really turn a customer away also. I remember times waiting for parts to arrive by courier (because I'm 3 hours away from my dealer) only to find out they forgot to send it

agco parts

Lee Wegner

Member

Tech 7

Well-known Member

Steve@Advance

Well-known Member

RBoots

Well-known Member

DavidNS

Member

Similar threads