(800) 853-2651
SHOP NOW

Case 1070 Transmission

D

Don Tractor

New User
Eight months ago my tranny died push in the clutch tractor stalls. Starting with easy fix first and no time I had a local repair shop send man to remove clean and install the power shift control valve same thing. So eight months later I split tractor changed broken c-I clutch plates 1 gear and reactor plate put back together now tractor does not stall with pedal depressed . Now reverse works low 1 goes in reverse nothing low 2 forward in low 3 is it a power shift valve problem or did I doe something wrong while tractor was split? thanks Guys
 
Best that you repost down on the CASE DB board. You could have problems with the feed tubes or something more serious. We need pressure reading of each clutch pack in each of the PS gear selections. You will get the help you need on the case board if you can provide us with the pressure readings.
Loren
 
Just a guess. But perhaps you did not get the c-4 clutch ring seated on the planet drum. Can be tricky to get it lined up sometimes. Best bet is to check clutch pressures
Ranch
 
You must log in or register to reply here.

Similar threads

W
MF 302 Industrial
Replies
1
Views
240
Will_Steve_NS
W
E
IH 3414 Hydro Help
Replies
10
Views
520
emiller
E
B
Ford 555b transmission issues
Replies
0
Views
193
Bnjhnsn
B
J
7045 trans brake confusion
Replies
5
Views
377
DrAllis
D
J
Case 580 D shuttle not working
Replies
6
Views
370
Dennis K (WA)
Dennis K (WA)
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top