IH 884 Engine

cool hand

Member
Location
SE IN
For some time my IH 884 has had a compression leak into the cooling system, so I decided to overhaul the engine. Today, while preparing the cylinder bores for new sleeves, I came across this between the #2 and #3 cylinders. Will this be a continuing problem if I complete the overhaul, or is there a solution to the problem? TIA!!
a158979.jpg
 
If you have good stand height on the cylinder sleeves than you should be fine. Just make sure there is not a crack under that chip. That area would not support the head gasket anyway. The fire rings set on top of the sleeves.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top