Oliver 1365 semi mounted plow

jacosch · Apr 13, 2017

I would like to pull an Oliver 2 point semi mounted plow with a 1365 not real sure if the draft is controlled through the top link or if I can just get away with it

tomstractorsandtoys · Apr 13, 2017

If it is thru the top link you just need to find a quick hitch. Dad pulled a 4 bottom Deere with his 720 and used a quick hitch. Deere made a mast attachment for the f145 plows that is being reproduced by Tyler the plow guy in MO. Tom

jacosch · Apr 13, 2017

Thanks I'll look into those options

Leroy · Apr 13, 2017

My plow was a MF 4 bottom and it has the settings for both with or without using the sencing and I ran it both ways with my 5000 Ford, If on draft setting just had to lower the quadrant setting some to get full depth. On my plow it had the mast and for using the top link it had a set of hookup points about 3" below where the mast pivioted to get the draft control to work, The other setting was the pins straight in line with the piviot so did not do anything either with or without the top link in place. But the ford is top link sencing. If your tractor is top link sencing you can still use the plow without the top link hooked up.

J. Schwiebert · Apr 13, 2017

It is top link sense.

jacosch · Apr 14, 2017

It looks like the Oliver plow should be able to adjust like you suggested

Oliver 1365 semi mounted plow

jacosch

New User

tomstractorsandtoys

Well-known Member

jacosch

New User

Leroy

Well-known Member

J. Schwiebert

Well-known Member

jacosch

New User

Similar threads