Long story short, I have a 2 cylinder Kawasaki engine in a gator that has been sitting for a long time. It was running when parked... frame broke and there were other issues so it sat for 4 years.
We cleaned up the carb, have 140-150 lbs compression in both cylinders, new plugs and spark on both, fuel into the carb and through into the cylinders. The valves are all free and moving correctly.
So here is the problem... it will only run on one cylinder at any one time. It is defiantly missing and when you pull the one plug cap off the other side keeps it going... then you can switch and it will run on the first cylinder. They just won't both run at the same time???
This has us puzzled, any help or ideas would be appreciated.
Thanks, Grant.
We cleaned up the carb, have 140-150 lbs compression in both cylinders, new plugs and spark on both, fuel into the carb and through into the cylinders. The valves are all free and moving correctly.
So here is the problem... it will only run on one cylinder at any one time. It is defiantly missing and when you pull the one plug cap off the other side keeps it going... then you can switch and it will run on the first cylinder. They just won't both run at the same time???
This has us puzzled, any help or ideas would be appreciated.
Thanks, Grant.
