new holland tn65 starting problem

donte1943 · Feb 28, 2017

My NH tn65 has gotten so it won't turnover and start unless I jiggle the mechanical shuttle lever back and forth until it finally connects. Is this a silinoid or starter switch problem?

dcarp · Feb 28, 2017

There is a neutral safety switch for that lever. It's either going bad or the switch has moved out of alignment.
Alignment is the most likely.

donte1943 · Feb 28, 2017

(quoted from post at 07:53:23 02/28/17) There is a neutral safety switch for that lever. It's either going bad or the switch has moved out of alignment.
Alignment is the most likely.

Thanks!
Where is the switch located? I don't have a manual that shows it.

dcarp · Feb 28, 2017

Well you can look at the NH parts catalog online, but good luck, it's really difficult to navigate. I think the best way is
to trace the linkage for the shuttle. The switch will be on the linkage somewhere. Start at the lever & work your way
till you find it. It's a simple contact switch, when the lever is in the neutral position it holds the switch in the open
position. I'm not at home or I would post a picture of a switch.

donte1943 · Feb 28, 2017

Thanks for all your help. I'll give it a try and let you know how it comes out.

new holland tn65 starting problem

donte1943

New User

dcarp

Well-known Member

donte1943

New User

dcarp

Well-known Member

donte1943

New User

Similar threads