(800) 853-2651
SHOP NOW

farmhand 810 grinder mixer - tech help

olgentdc

olgentdc

Well-known Member
Location
Harrison County , Elizabeth Ind 47117
kinda over my head on this one guys and I need your help ,.been trying to get some info on AGCOS site ,,. cant get in to feed grinders ,,. I need a blowup of the gearbox under the mixing tank ,,. for some reson mine is stuck ,. some movement , but I fear it is coglokt in the gear box ,,. I think I need to drop the gear box ,,. not sure if mixing auger is splined and sitting on the floor or if it is pinned to the gearbox,.. many thanx , jim
 
I can tell you on a New Holland, that shaft is splined. I really doubt it would be pinned on, but I could be wrong. What can happen with those gear boxes is the top seal can get damaged, and let ground feed in. Needless to say, that is not good!
 
That's a heck of a deal ain't it? All they show is a Farmhand 810 defoliator. Not much help from me,but on a New Holland,you have to take the inspection cover off the bottom of the mixer and take a bolt or two out of the top of the gearbox that goes down in from the top. On a Gehl you don't.
I know the Gehl came off easier than the NH. It's just had a 9 spline shaft. The NH has a 21 spline. On each one,I had to get up on top with a sledge hammer and hit the top of the mixer auger to jar it loose. It took a lot more hitting on the NH.

Mine started locking up on the NH. If I'd turn it backwards,it would go again for a while. The top bearing was coming apart and one of the rollers was floating in to the gears.
 
I rebuilt one for a neighbor about 3 yrs. ago but I'll be darned if I can remember. You know what they say-- The mind is the first to go and I can't remember what the next is. I took it apart and sent him to dealer to get the parts about 80 miles away. He came back with the parts and a 12 row planter that was on their lot.
 
You must log in or register to reply here.

Similar threads

S
Farmhand 817 grinder mixer
Replies
4
Views
482
used red MN
U
J
Case 1737 rebuild
Replies
6
Views
1K
used red MN
U
F
Tractor ID Help!
Replies
6
Views
403
FrankDaPlow
F
Z
New Holland 350 mixer grinder unloading auger
Replies
6
Views
1K
Z71caleb
Z
R
Maybe it was a bargain after all.
Replies
5
Views
868
J.Wondergem
J.Wondergem
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top