721BSCHMIDT
New User
I have a 1953 JD 70 gas that I would like to convert to electronic ignition because cylinder #1 fouls up the plug in about 1-1.5 hours of use, no matter if it is running a grain auger, or just running a box scraper, i.e. I have tried the hottest plug (the ones from New York),and have had no better results than the hottest Motorcraft, AC, etc. etc. After cleaning up the plug either through a little sandblast, or wire wheel, the tractor starts and runs perfect---plenty of power until it fouls up, and the cycle continues. I would like to know what kind of results anyone has had converting a JD 2 cylinder with positive ground over to electronic ignition. What is the difficulty of conversion for someone like me that has never done electronic conversion before?
Brian
Brian