Converting 6V to 12V Using Motorcraft 3 wire Alt

texasman500 · Nov 27, 2016

If you have one of these on an old ford or ferguson tractor, but you need a regulator I found one that will work
for only $16.99. It's a MasterPro Ignition 2VR2 4 - pin Regulator. You can find these at Oreilly's Auto Parts.

tn terry t · Nov 27, 2016

ive had a ford alternator on a super a since 2002 I uesd a two wire regulator that I was told was a dodge . main wire runs to the amp gauge and the field wire runs to the regulator from regulator to the same side of the switch as the ignition wire no lights no diodes no nuthin zero problems

tn terry t · Nov 27, 2016

wt7frd9-dodge-p200-voltage-regulator.html

might have to copy and paste this link

Dalex · Nov 27, 2016

An old rebuilder told about that regulator back in the 70's Very common
on Chrysler products , he told me it would work on ANY alt, as long as
you had a volt meter or ammeter. Won't work with an idiot lite. It has a
screw term on one end and a spade term on the other. He sold me rebuilts
for $5 , I carried several.

Rob_Yesterday · Nov 27, 2016

Went to NAPA they gave me a GM 1-wire self regulating unit and it works great. I'm not running allot of accessories, but this worked for me on my 430.

Converting 6V to 12V Using Motorcraft 3 wire Alt

texasman500

Member

tn terry t

Well-known Member

tn terry t

Well-known Member

Dalex

Well-known Member

Rob_Yesterday

Member

Similar threads