Carburetor on a 1968 3020

noela96 · Nov 19, 2016

Yes a guy took the carburetor off the tractor, and i am trying to put in back on. I am having a problem with trying to figure out how to connect the throttle cable to the carb. There is a spring and pin and a screw and cant figure out how they go on to connect it. Any help will be great thanks.

Bob · Nov 19, 2016

Throttle CABLE???

Throttle is a rod from the governor, #45 in the drawing, I believe, Spring clip at the front, cotter pin at the back. NO spring except the main governor spring.

<img src = "http://jdpc.deere.com/pimages/R469/R4694__________UN12DEC94.gif">

CHOKE is a simple cable setup, tho.

noela96 · Nov 19, 2016

The carberator is a Zenith and it's the cable that connects to the carb it's different then what it shows in the diagram you posted

Bob · Nov 20, 2016

Still not clear on this, but unless the tractor has been modded, the cable would be CHOKE, NOT throttle.

Here's the choke cable Key #4, pictured next to the throttle linkage on the throttle lever side of the governor.

Key #46 in the earlier diagram would be used with ANY of the option carbs.

Rod from governor back to throttle, R41569 is shown as Key #48 in the first diagram and Key #15 in the second diagram.

<img src = "http://jdpc.deere.com/pimages/R164/R16450_________UN01JAN94.gif">

Carburetor on a 1968 3020

noela96

New User

Bob

Well-known Member

noela96

New User

Bob

Well-known Member

Similar threads