Red help

Mntn man · Oct 9, 2016

Hi. I've got a 62 861 that I love. Bought a loader that came off a 63 4000 to mount on mine with a front mount pump. Got a real nice loader at a good price that came with everything. As I was about to start the install I noticed that my 861 with power steering has no room between the crank pulleys and front axle mount to install the shaft adapter. Does anyone have some pictures of what I need or what there's looks like so I can compare? I'm not sure if mine has the factory pulleys or not and really not sure what it should look like. Thanks for any help

old · Oct 9, 2016

I have an 841 so should be very much like yours. The shaft hub is tight on my 841 and you have to hold it just right to get it in. You also have to make sure you have the correct one. I would have to go threw my notes to see if I still have the info on the one I got form this site this past summer due to the old one starting to slip due to wear. I did have to use 2 people so as to get it in. The son slipped it in as I push the drive shaft in so as to hold it in place as he got the bolts started. As I said it is tight and you have to hold your mouth just right and maybe stand on your head and oh you also have to have the 4 bolts in the hub since they will not slip in after you have the hub in

Red help

Mntn man

New User

old

Well-known Member

Similar threads