Front hydraulic drive shadt

Jchynow3 · Sep 16, 2016

I have a to30 with a front loader. My drive shaft to the front loader bent and tore off the pulley. I can't find a replacement that will fit. The standard ones available are just over 9". Mine is 14". Have searched everywhere but can't find a replacement. Any suggestions? I

Bob · Sep 16, 2016

That's a pretty vague post. There's lots of styles of "stinger" shafts, some are threaded, some are splined, which brings up the question of, if splined, how many splines?

A photo would help.

If you have something out of the ordinary, you will need to find a nearby machine shop that can make what you need or modify a common replacement shaft to fit your application.

Jchynow3 · Sep 16, 2016

First of all, thanks for the response.. but yeah, you're right... okay. First time posting so give a utahn' a break

Let me try again. I have a TO30 tractor with apparently a non-standard/non-specific front loader. What I am trying to do is go from the standard crank shaft pulley (Part# MFS112 on Steiner) with 2 3/4" bolt holes, which then goes to a Front Hydraulic Pump Drive adapter (part# ABC1812), which is 10 spline. The problem is the available 10 spline Front Hydraulic Pump Drive Shaft (part# ABC1814) is only 9 3/8" long. I need a drive shaft 14" long. one end connects to the 10 spline pump drive adapter (part# ABC1812) and the other to a 2 bolt drive flange. Thanks for any help but I was thinking that the only option would likely be engaging a machine shop. Thanks again for any help or advice.
"

Front hydraulic drive shadt

Jchynow3

New User

Bob

Well-known Member

Jchynow3

New User

Similar threads