head bolt torque?

Ford4400tractor · Sep 12, 2016

I need to know the head bolt torque and sequence for a 1975 model 4400 tractor. I also need the Intake manifold torque specs. Thanks a ton! Help will be greatly appreciated!

thanks, Nathan

Gary H. · Sep 12, 2016

Head bolt torque in the book is 105 ft. lb. There was a bulletin that changed it to 115. Just start in the middle and work outward. Make sure ther
is the hardened washer under all of the heads of the bolts.

buickanddeere · Sep 13, 2016

.

Clean chased threads in head is important to allow even tensioning . Even torque does not result in even tension of threads are dirty or stretched.
Even if the bolts are not torque to yield . Tossing the old bolts out and using new boots/studs can make leakage problems go away.

cushman · Sep 13, 2016

I torque the manifold bolts intake,and exhaust to 33FtLbs,then retorque after it has warmed,then cooled. Make sure the gasket surfaces are
clean!

head bolt torque?

Ford4400tractor

New User

Gary H.

Member

buickanddeere

Well-known Member

cushman

Member

Similar threads