OT: Can't get my Eljer Titan 4 to seal

IHC Red · Sep 8, 2016

I got this from Menard's about 6 years ago. It's the one that was able to flush a bucket of gulf balls. It has been an excellent unit and has never let me down (excepting once when I didn't fully commit to the flush).

It started slowly seeping so I replaced the seal with great hopes. It might have gotten better, but it still seeps. I can't see why I would have to replace the whole "tower". I added some web images below.

I'm thinking of putting a 3/4" stainless nut to add some weight to the "float".

Has anyone else had this problem with this unit and been able to fix it ? Thanks in advance.

maxresdefault.jpg" height="440" width="960

showcrop · Sep 8, 2016

I have never seen one of those but I bet that the problem is just a little mineral film on the black plastic seat.

notjustair · Sep 8, 2016

I bought a nice toilet from them and worked for 6 months to get it to seal. I finally put it out on the patio up on blocks to see what was going on. There was a defect in the casting. I hated to return it after being mounted a million times in those six months. It sitting out in the garage.

TomR Ont · Sep 8, 2016

IHC Red
Vinegar will help if you have lime in your water.
Look at the glass carafe coffee pot is it white after a few pots.

OT: Can't get my Eljer Titan 4 to seal

IHC Red

Member

showcrop

Well-known Member

notjustair

Well-known Member

TomR Ont

Member

Similar threads