Corn Sheller Belt.............McCormick

banjoman09 · Aug 29, 2016

I have ask this before....and had a few answers. But still lost; know of anyone that can make me a 112" belt- 4" wide.....for my corn sheller? I can get the splice at tractor supply...but dont have the tool or the belt. Doesnt need to be a new one...a good used one is fine.
Thanks.

Keith Molden · Aug 29, 2016

You can also get the splice kits at T.S. But be prepared to give roughly $150.00 for the splice kit alone. You might see if a local farmer could splice it for you. Don't know if this helps, but it's a thought. As an after thought, for the corn sheller, you could punch holes in each end of the belt and use rawhide or some other cord to splice as there won't be nearly enough pull on the belt to warrant the splice kit. Keith

banjoman09 · Aug 29, 2016

Thanks...I will check on this.

craigco · Aug 29, 2016

I used an old round baler belt that I spliced together with chap leather. It on a burr mill running to the tractor. Been 3 years leather just starting to wear. Also Colorado rubber, I think is the name makes new ones endless or with splice for cheap. I had one made 4" x 110" with splice it was under $20 I think. Had it two days later. Had to send it back and they shortened it for me for free and sent it back.

moresmoke · Aug 29, 2016

Easiest place to find a belt that size is a piece of smooth baler belt. You can trim it to width on a table saw. Any dealer that sells balers should have the tools to splice belts.

Chris(WA) · Aug 29, 2016

Another source is a belt supplier that sells conveyor belting. They can supply material and splice.

banjoman09 · Aug 29, 2016

thank you....I will look to see if I can find them.

banjoman09 · Aug 29, 2016

I contacted them and he needs more info.....I told them 4" flatbelt ....any info you can help me give him? Thanks.

Tramway Guy · Aug 29, 2016

McMaster Carr has flat belting. They mention thickness and what pulley diameter is recommended. 4" is one of their sizes.

banjoman09 · Aug 29, 2016

okay and thanks! I think I emailed them a month ago and never answered me!

GarryinNC · Aug 29, 2016

I have some old belts from a Hesston round baler that are 4.1 inches wide and are 3 ply with some texture but not chevrons, etc. I have a tool to put in clipper lacing also. Where are you located? You said 112 inches?

Garry

gfoster at yadtel dot net

Pete in MD · Aug 29, 2016

Give Albright Saw Co. a call, (740) 887-3799.

We just replaced some 4" belts. One of them was 120" long and cost right at $50 complete with lacings. They should be able to make any length you need.

banjoman09 · Aug 30, 2016

thanks!

craigco · Aug 30, 2016

Think I got what they called rubberized canvas belt. It's red in color.

J.Wondergem · Aug 30, 2016

banjoman09, are you around West Michigan? I can slice it for you, if you are.

banjoman09 · Aug 30, 2016

Holy smokes.....Im in Kansas! Thanks for the offer! I do think I found a farmer close by that has extra belting - ill try to get a fastener and the tool and get it
made...! Thanks!

Corn Sheller Belt.............McCormick

banjoman09

Well-known Member

Keith Molden

Well-known Member

banjoman09

Well-known Member

craigco

Member

moresmoke

Well-known Member

Chris(WA)

Well-known Member

banjoman09

Well-known Member

banjoman09

Well-known Member

Tramway Guy

Well-known Member

banjoman09

Well-known Member

GarryinNC

Well-known Member

Pete in MD

Well-known Member

banjoman09

Well-known Member

craigco

Member

J.Wondergem

Well-known Member

banjoman09

Well-known Member

Similar threads