International 244 - Need Help with GlowPlug Wiring

trentbrown1964 · Jul 7, 2016

NEED HELP PLEASE
I have an International 244 and Need Help with GlowPlug -to- GlowPlug Wiring Arrangement.

Does anyone have a Diagram or Drawing or Picture showing how the GlowPlug Wires are arranged starting with the Lead Wire connecting to the First GlowPlug and going through all three Glow Plugs?

--OR--

Can anyone give me instructions on the GlowPlug Wiring or tell me where I can obtain this information?

I have looked on the internet and all I can find is a general wiring diagram that does not show in detail how each wire is connected to each GlowPlug ( ie.. above or below insulator on glowplug).

Thank You,
Trent

Chris in SK · Jul 8, 2016

Trent I've got a Mitsubishi buck with is same as IH 234, 3 cyl mits diesel. Basically the feed wire
for the glow plugs goes to the rear plug. There is a short wire that then links to the middle plug,
then another short wire links 2nd to 3rd. That's it.

trentbrown1964 · Jul 8, 2016

(quoted from post at 19:33:20 07/08/16) Trent I've got a Mitsubishi buck with is same as IH 234, 3 cyl mits diesel. Basically the feed wire
for the glow plugs goes to the rear plug. There is a short wire that then links to the middle plug,
then another short wire links 2nd to 3rd. That's it.

Chris,
Do all three wires connect above the insulators on each of the three GlowPlugs? Or, do some of the wire connectors go above the insulators and some go below the insulator? ( I think that is called "in series" ? )

Thank you very much.

Chris in SK · Jul 11, 2016

The wires all just connect above the insulators to the tops of the glow plugs under round knurled nuts.....at least that's how they are on the tractor I have.

trentbrown1964 · Jul 11, 2016

Thank you Chris.

Trent

International 244 - Need Help with GlowPlug Wiring

trentbrown1964

New User

Chris in SK

Member

trentbrown1964

New User

Chris in SK

Member

trentbrown1964

New User

Similar threads