Hydraulic question White 2-60

zxcvsteve · Jun 10, 2016

I recently bough a White 2-60 4wd. I hooked up a mower to the remote cylinders and when I move the lever the lines kind of shudder but no movement on the mower. It also has a bucket in front. Any ideas ?

Traditional Farmer · Jun 10, 2016

Does the 3pt hitch go up and down?

AL.D · Jun 10, 2016

Are you sure the hyd. couplings are compatible?

notjustair · Jun 10, 2016

I only say this because I do it every couple of years
on the hay rake-

Does it have two cylinders? Are you sure that you
have the hoses "paired" to the same remote? If you
accidentally cross hoses you get lots of shuddering
and no moving. I usually drop a few choice words
about how the rake is broken and I don't have time
for this. Then I have Deja vu and switch the hoses
and feel stupid.

zxcvsteve · Jun 11, 2016

not sure they are compatible, they went in and locked. How go I make sure they are compatible?

zxcvsteve · Jun 11, 2016

i switched hoses too, doesn't make any difference

Traditional Farmer · Jun 11, 2016

Take the end off the fitting that comes from the tractor and hit the hydraulic lever for an instant if you don't have fluid squirt out you have a problem with the tractor if you have fluid its most likely with the couplings.If the system has air you may need to let the hydraulic lines dump some fluid to purge the line.

Hydraulic question White 2-60

zxcvsteve

New User

Traditional Farmer

Well-known Member

AL.D

New User

notjustair

Well-known Member

zxcvsteve

New User

zxcvsteve

New User

Traditional Farmer

Well-known Member

Similar threads