Cultivators off of what?

Dieselrider · Jun 7, 2016

What might these be off of? A friend loaned them to me to use but, I am not sure just what i want to do with them. Im assume they came off a mid mount cultivator set up like a C or H International but, I don't know for sure. Pretty rusted up and heat didn't free up but one stuck bolt. Not sure if they are worth the effort.

ohiojim · Jun 7, 2016

don't know what they fit but for the bolts repeated heating and cooling has always worked for me, might have to do it 4 or five times on something that rusty, heat them red hot and let cool then repeat....

gene bender · Jun 7, 2016

Looking at the brackets for the guards i would say they are for the C Those are a weeder that was an extra for the cults.they work well when the crop is small.

GeneMO · Jun 7, 2016

The look like they would almost set down in my electrolysis tank. That would solve the rust problem.

But again, not sure it is worth the effort.

What did you have in mind for use? A one row garden weeder?

Gene

Dieselrider · Jun 7, 2016

That's pretty much it gene. I have two of them and was thinking of a setup to allow one on each side of the row.

Leroy · Jun 7, 2016

That is for on top of the row like a rotary hoe, not beside the row they are for loosening the soil around the plants and set up corectly the wheels act as fenders to keep the dirt from the shovels from covering the small crop plants. Lots of makes could be set up like that. You will find something in most cultivator operators manuals about them.

gene bender · Jun 10, 2016

Thye are made to go over the row when crop is small as they will setback weeds and not roll dirt over the crop

Cultivators off of what?

Dieselrider

Member

ohiojim

Well-known Member

gene bender

Well-known Member

GeneMO

Well-known Member

Dieselrider

Member

Leroy

Well-known Member

gene bender

Well-known Member

Similar threads